How to fix problems related to magicjack ?

If you do not have MusicMatch / Yahoo Music Jukebox, follow steps 1 and 2.

Unplug your magicJack, wait 30 seconds, then reconnect using another USB port. This is the most simple and works in 90% of cases.

Remember that MagicJack works best plugged directly into a USB port.
Do not plug in a USB Hub.

Wait 2 minutes for the software is installed correctly. DO NOT TRY TO CALL OR USE THE KEYBOARD UNTIL INSTALLATION PROCESS is completed and displayed on the BOX "Ready to call".
If the MagicJack does not work still proceed to number 3.

Open Task Manager (control + ALT + DEL) and click the Processes tab. Locate and stop the following processes: UTSCSI, NEWNET_SETUP, MagicJack, and MAGICJACKLOADER. If one or more of these are not listed, do not worry. Now unplug your magicJack, wait 15 seconds and plug it again.
Hi Well I had a similar problem this will help you epsero, you'll copntrol panel, and you make sure your sound Altova ARE as determined and not auriulares lso, which are the choice of magicjack, it sounds weird but so must be , to change derecheo you click and select "set as default communication device" and see that changes the arrow on the icon of the speakers. pruba tabi by going to the tab comunicaines, but before you select the headphones (the icon with the phone) and then you go to comuniciones prubeas Selected the option "do nothing". and ready hope is that the problem, if not the sound mixers pruba up the volume to majicjack.
The Magic Jack is designed to self-run and install itself. You must accept the connection before attempting to use the Magic Jack. The connection takes 1 to 3 minutes to complete installation.

Once installation is complete, the Magic Jack phone will show a manager (an icon) on the desktop of your computer.

The easiest way to determine if you are connected is read from the phone manager on your screen, if it says "ready to call" phone number below, then your Magic Jack has been installed correctly.

If not, then so check the following:
1. Internet connection
2. Register (Sometimes the Magic Jack asks for your password, email and password used during installation).

Assuming the Magic Jack is connected and the phone manager says you are ready to call, yet you have no dial tone, then you need to check the connection between your phone and Magic Jack.