How to repair Krzr phone?

1. After removing your back cover and battery of your mobile, remove the four screws you will see. Three of the screws will be black and one of them will be silver. you shoula make it sure that the silver screw goes back in the same place it is removed from.

2. With the four screws removed now you can now lift the battery slot carefully from the back of the your phone. Where it joins at the bottom it will require some of the force

3. With the battery slot removed you have the access to one of the ribbons which connects the screen to the main body of the phone.you will have to Un clip this (it fits like a plug and socket).

4. Now remove the bezel at the top of the phone. It is held on with double sided tape. Run your fingernail along the edge and carefully peel if off

5. Your now have full access to four more screws. Remove these and then in turn the plate which the screws were holding

6. You now have full access to the LCD. now you can Unclip the two ribbons which are being held back

7. You now have access to the LCD. Unclip the two ribbons which are being held back.

8. Now separate the two screens of your mobile by running your fingernail along the edge where metal clips hold them together

9. Now unclip the front cover. It is held on the clips around the edge. Just run your fingernail around the edge to remove it easily

10. Your screen should now be in two parts now. You can now replace the screens

11.You will have to reverse the whole procedure for reassembly